SDC welding generator

SDC-10 Generator 1, 10kw,1500rpm, 50Hz 2, generating&welding dual-use synchoronous generator 3, single-phase 4, CE, ISO9001

Products Feature

      SD/SDC series generating & welding dual-use generators are of high performance, self-exciting double-use generators specially designed for generating welding separately, or for welding and moderately lighting simultaneously. This generator is suited for direct coupling or belt driving with a medium speed petrol or diesel engines, or AC or DC motor. 

The output voltage of generator is 230V AC, and that of the welding is no greater than 80 volts, its frequency is either of 50Hz or 60Hz. Other rated voltage can also be designed according to the order. When the double-use set is used for generator with a 5% speed regulation of the prime mover, under a load variation from 0→100% and 100% → 0, cosΦ1.0, the steady-state voltage regulation rate is no greater than ±5%. As load being suddenly changed, the double-use generator can be rapidly adopted and operated steadily. When it is used for welding, it has a good characteristic performance for welding current to produce a steady electric arc thus ensured the quality of welding. 

       SD/SDC series generator is of drip-proof, axial ventilation type. The construction of its frame with front and rear end cover is of casting iron. On the end cover of the drive end, there installed a set of tapped spigot holes, which can be fitted with a prime mover conveniently. At the same time, there are two screen mesh plate on the outlets of the drive and the inlets of the no drive and to provide ample protection to the machine. After removing the screen mash plate at the non drive end, the brushers and slip rings are easy to access.

      SD/SDC alternators can be designed to be used in muggy damp area or on boat.

 

Service Conditions

--Ambient Temperature:  -15°C~40°C

--Altitude:  not exceed 1000 Meter

--Rated Voltage:  380V or any voltage between 110-400V

--Rated Frequency:  50Hz/60Hz

--Protection Class:  IP21, IP22, IP23

--Insulation Class:  B

--Cooling Method:  IC0141

--Working Duty:  S1(Continuous)

-- Humidity:  Lower than 90% 

SDC welding generator